New Scotland

Color: Graz 2F
Composition : 100% Polyester
Width : 558 grams per linear metre ± 5%
Weight : 150 cm ± 1% usable
Abrasion : 130.000 Rubs (800 gm/12kPa), Martindale
Biscay 123Black Sea 9Blue River 12AConway 16ACoral 14NDusty Blue 041Equator 11NFalcon 16NFrench Navy 044Gray 091Graz 2FKalahari 1Kingsland 14ALake Park 22Legacy 19PMarine 4Niagara 12MOdessa 19Pablo 166Redhill 3Rush 150Rush 8Salmon 20Sunbeam 144
Clear selection
DesignNEW SCOTLAND
Colour Fastness to LightMeets ISO 105:B02 Level 5
Colour Fastness to RubbingMeets EN ISO 105-X12
Dry : 4-5
Wet : 4-5
FlammabilityComplies with BS EN 1021-1:2006 (Cigarette) Tested in combination with UBM foam 32kg/m3
Maintenance⦿ Vacuum or brush away loose dirt before it becomes embedded in the fabric.
⦿ Clean up spills and stains right away. The longer soil and stains stay on the fabric, the harder they are to remove.
⦿ Quick blot up stains or spills with an absorbent cloth or sponge. Be careful not to rub the stain deeper into the fabric. If the spill is solid or semi-solid (like butter or ketchup), remove the excess by gently lifting it with a dull knife.
Colour Limit⦿ Batch to batch variation in shade may occur within commercial tolerances.
⦿ We recommend that fabric be examined before use, no claims will be considered after cutting.
ApplicationAlways apply in the same direction.

Preparing for Removing Stains
  1. First brush any subtantial, encrusted marks by hand, using a brush or spatula, then vacuum clean.
  2. Pre-clean with a neutral universal agent (incl. possibly dry foam as well).
  3. After each cleaning remove any residual surfactant, using spray extraction.
Stain removal agents should only be worked in with a clean, damp, and absorbent cloth
  1. Treat with an agent containing solvent, using manual method as well (scrape off, beat lightly, vacuum clean when completely dry).
  2. Cut out burn or melt stains. Take of piece of fabric of the same size - if none is available take it from a part of the material that is less visible - and stick in from the left with double sided tape.

After Treatment

After each cleaning we recommended the use of spray extraction to remove any edge markings or residual cleaning agent.

General :

These are only general recommendations that cannot unreservedly 100% removal of stains. We recommended in all cases that you consult a professional cleaner.
Back to Top
preloader