Springs

Color: Fawn 140
Composition : 100% Polyester
Width : 453 grams per linear metre ± 5%
Weight : 165 cm ± 1% usable
Abrasion : 70.000 Rubs (800 gm/12kPa), Martindale
Bay 040Belize 011Blazer 103Blue Beach 041Bordeaux 030Briquet 090Buttercup 141Carrot 102Cayman 123Chocolate 081Cinnamon 080Cocoa 083Conway 160Dago Orange 200Fawn 140Golden Road 050Green Brier 230Green Field 220Grey 162Lime 022Long Bay 170Marine 042Mica 180Middle Red 010Oxygen 225Scuba 043Seagull 163Silver 168Solano 053Stone 161Techno 171Terra 181Tosca 210Venus 190Veracruz 100
Clear selection
DesignSPRINGS
Colour Fastness to LightMeets ISO 105:B02 Level 5
Colour Fastness to RubbingMeets EN ISO 105-X12
Dry : 4-5
Wet : 4-5
FlammabilityComplies with BS EN 1021-1:2006 (Cigarette) Tested in combination with UBM foam 32kg/m3
Maintenance⦿ Vacuum or brush away loose dirt before it becomes embedded in the fabric.
⦿ Clean up spills and stains right away. The longer soil and stains stay on the fabric, the harder they are to remove.
⦿ Quick blot up stains or spills with an absorbent cloth or sponge. Be careful not to rub the stain deeper into the fabric. If the spill is solid or semi-solid (like butter or ketchup), remove the excess by gently lifting it with a dull knife.
Colour Limit⦿ Batch to batch variation in shade may occur within commercial tolerances.
⦿ We recommend that fabric be examined before use, no claims will be considered after cutting.
ApplicationAlways apply in the same direction.

Preparing for Removing Stains
  1. First brush any subtantial, encrusted marks by hand, using a brush or spatula, then vacuum clean.
  2. Pre-clean with a neutral universal agent (incl. possibly dry foam as well).
  3. After each cleaning remove any residual surfactant, using spray extraction.
Stain removal agents should only be worked in with a clean, damp, and absorbent cloth
  1. Treat with an agent containing solvent, using manual method as well (scrape off, beat lightly, vacuum clean when completely dry).
  2. Cut out burn or melt stains. Take of piece of fabric of the same size - if none is available take it from a part of the material that is less visible - and stick in from the left with double sided tape.

After Treatment

After each cleaning we recommended the use of spray extraction to remove any edge markings or residual cleaning agent.

General :

These are only general recommendations that cannot unreservedly 100% removal of stains. We recommended in all cases that you consult a professional cleaner.
Back to Top
preloader